Jescast Sealer – 500ml

Jescast Sealer – 500ml

Protect and finish your Jescast creations with Jescast Sealer 500ml. This easy-to-use sealer helps improve the finish of your castings and provides a simple way to seal them after demoulding.

Jescast Sealer works well for makers who want to add a protective finish to their casting projects. You can apply the sealer by dipping your casting into the product or by using a brush. This gives you flexibility when working with different shapes, sizes and designs.

Easy Application

You can apply Jescast Sealer as soon as your casting has been demoulded. There is no need to wait before starting the sealing process.

For the dipping method, submerge your casting in the sealer. Leave it submerged for approximately 3–5 minutes during the first application. Remove the casting and continue dipping it in and out of the sealer until you achieve the desired result.

For an excellent finish, three dipping applications can produce outstanding results. However, the number of applications you need may vary depending on the casting and the finish you want to achieve.

Brush Application

Dipping is not the only way to use Jescast Sealer. You can also apply it with a brush. This method can be useful for larger castings or pieces with detailed designs.

Apply the sealer evenly across the surface of the casting. Take care to cover the areas that require sealing. Allow the product to work according to the recommended application process.

Jescast Sealer Benefits

• Convenient 500ml size
• Suitable for Jescast casting projects
• Can be applied immediately after demoulding
• Easy dipping application
• Can also be applied with a brush
• Allows you to build up the finish through multiple applications
• Suitable for castings of different shapes and designs
• Simple addition to your casting supplies

Directions for Use

Dipping method:

1. Demould your casting.
2. Submerge the casting in Jescast Sealer.
3. Leave it submerged for approximately 3–5 minutes for the first application.
4. Remove the casting from the sealer.
5. Continue dipping it in and out until you achieve your desired result.
6. For outstanding results, three dipping applications are recommended.

Brush method:

Apply Jescast Sealer evenly with a suitable brush. Make sure you cover the required areas of the casting. Use additional applications if needed to achieve the desired finish.

Jescast Sealer is a practical product for anyone creating Jescast castings and looking for a simple sealing method. Its versatile application makes it easy to work with both detailed and larger pieces.

Add Jescast Sealer 500ml to your casting supplies and give your finished creations a professional final touch.